HAWK Twin Talon
Dual Brush Polishing Edger
Scrub and Polish Tight Spaces - 12", 14" and 16"
Fit the Twin Talon with a Pad
to Polish Stone
Install the Handle
to Work the Tightest Spaces
Fit a 16” Twin Talon with Nylon Brush to Scrub
The Twin Talon was born out of the need for affordable polishing edger with compact power. Dual 1/8 HP motors spin heads
at
500 RPM in opposing directions. The result is very controllable polisher with low center of gravity.
The Twin Talon is small
enough to work on counter tops but large enough to polish a small bathroom floor. Available in three sizes. The 36” removable handle
(oponal) mounts over the hand grips and lets you stand while using the Twin Talon as an edger, carpet spotter and a floor scrubber.
Engineered Design:
• Compact 22.5 lbs. design. 3 sizes (12”, 14”, & 16”)
• The 14” model is designed for
use with diamond tools, mounted
with pad driver (#AS003-7)
• 1/8 HP dual motors
• Optional 36” easy-mount
handle for use while standing
• Exclusive Mag-LockTM brush and driver attaching system
• Durable resin cover over steel
frame for reliable performance
• Quiet belt drive power
• Simple operator switch for both hand or foot operation
•
2-piece commercial, 35 ft. (14-3) SJT easy-wrap power cord
• Optional easy-mount handle (#KIT3062)
• Wide selection
of drivers & specialty brushes
• UL / CUL approved components for safe performance
Grit
Brush
6" #AS005
8" #AS005-8
Edger
Brush
6" #AS006
8" #AS006-8
Grit Edger
Brush
6" #AS001
8" #AS001-8
Red Scrub Pad
(case of 5)
6" #AS009-CS
8" #AS009-8CS
White Polish Pad
(case of 5)
6" #AS011-CS
8" #AS011-8CS
Black Strip Pad
(case of 5)
6" #AS010-CS
8" #AS010-8CS
Bonnet
(case of 6)
6" #AS008-CS
8" #AS008-8CS
Pad
Driver
6" #AS003
8" #AS003-8
Nylon
Brush
6" #AS002
8" #AS002-8
Fit the Twin Talon with a Bonnet Driver and Bonnet to Spot Clean Carpet
Optional
Easy-Mount Handle
#KIT3062
(574) 294-1910
HAWK ENTERPRISES - 2902 Park Six Court - Elkhart, IN 46514 - (574) 294-1910
www.hawkenterprises.com
Convenient Size
8.5" Tall x 16" Wide
x 8" Deep