The Hawk Orbitec Planetary Driver makes quick work of polishing large concrete and stone areas. Six independent sealed ball bearing
pedestals spin 3” tools up to 400 RPM. Orbitec extends tool life through cool running. The Orbitec with counter-rotating heads work
60% faster than fixed tool drivers.
Engineered Design
• The Orbitec Driver mounts under most conventional
design 1.5
HP / 175 RPM floor machines
• The aluminum clutch plate is custom milled to provide
easy on
and off mounting
• Three sizes for use on 13”, 17” and 20” floor machines
• The electroplated 1/2” thick steel
drive plate is built with
six tool-holding pedestal heads
• These pedestals with are built with
tool holding hook
facing, securely mounting round diamond tools with
hook-and-loop backing.
Diamond tools are quickly
changed without shop tools.
• The floor machine drives the Orbitec
plate at 175 RPM in a
clockwise direction. The pedestals spin 3” diamond tools
at 400
RPM in a counter clockwise direction. This counter-
rotating operation drives diamond tools 60% faster than
fixed mount drivers.
• Add the optional dust ring and vacuum hose mounting kits
to your Hawk floor
machine for dust containment
• Add optional machine weights on your Hawk floor
machine for greater
down pressure and faster floor
prep results
• Order diamond tools separately