HAWK Claw
Professional Diamond Tool Driver
Professional Polishing of Concrete & Stone
Includes Round Tool Adapters and Metal Hole Blanks to Fit the Milled Recesses
20"
17"
15"
10"
13"
Custom Milled
Aluminum Clutch Plate
Plastic Spacer
(6) 1” Neoprene
Rubber Vibration
Isolators
3/8” Thick Coated Steel Drive Plate
10”, 13”, 15”,
17” & 20” Sizes
17” & 20” Claw Plate Adds Hand Grab Holes
HAWK CLAW MOUNTING DESIGN
WITH VIBRATION ISOLATORS
CLAW Drives 3” Round
and Trapezoidal Tools
CLAW Steel Plates are Milled with Tool Mounting Recesses
3” Round Resin Tools Mount Fast and Reliably
The Hawk CLAW Diamond Pad Driver provides peak grinding and polishing results to the natural stone and concrete tradesman. The CLAW
is available in five sizes - 10”, 13”, 15”, 17”, and 20”, driving both 3” round, and trapezoidal tools.
Tools are held in milled recesses
in the CLAW plate with the unique Mag-Lok industrial magnet system. Grinding and polishing tools mount securely on the plate, yet
are easy to change without shop tools.
Operating vibrations are reduced by Neoprene rubber vibration damping isolators built into
the mounting system with custom milled aluminum clutch plate. Power the CLAW with your severe-duty 1.5 HP rotary floor machines.
Engineered
Design:
• The weighted CLAW plate is built with 3/8” plate steel, e-coated
for corrosion resistance
and easier clean up
• The face of the CLAW plate is milled with round and trapezoidal
tool mounting recesses,
fit with a Mag-Lok industrial magnet
• The top of the plate is fit with a custom milled aluminum NP9200
clutch
plate, sitting on top of six 1” Neoprene rubber vibration
isolaters. These isolaters reduce vibration and flex
over high
points and lippage.
• Round 3” resin tools mount securely on a 3” metal adaptor plate
with hook and loop face. The adaptor and tool combination
mounts onto the CLAW plate with the Mag-Lok System.
•
The 17” and 20” CLAW plates add hand grab holes
• Includes round and trapezoidal hole blanks. Blanks prevent
debris buildup in recesses.
• Includes 3” steel mounting adapters with hook & loop mounting
• Order additional adapters(#KIT2018-1 - Set of 6), or the
replacement hook face sheet that mounts on the steel adapters
(#KIT2018 - Set of 6).
(574) 294-1910
HAWK ENTERPRISES - 2902 Park Six Court - Elkhart, IN 46514 - (574) 294-1910
www.hawkenterprises.com